Includes
- 1 x UNIMIG Razor 200 AC/DC Welder U12002K
- 1 x UNIMIG Professional Series Helmet - Black U21015
- 1 x UNIMIG ROGUE TIG Welding Gloves UM-S-TG1L
- 1 x UNIMIG Wired Foot Pedal - 7/9 Pin Suits U12003K / U12002K / KUM-M-VT180ACDC / U12001K / KUM-M-RTIG200ACDC U51017
- 1 x UNIMIG T2/T3W Torch Consumable Starter Kit U42005
UNIMIG Razor 200 AC/DC Welder U12002K
Get incredible results from start to finish with this professional-grade TIG welder.
Suitable Material:
- TIG: Aluminium, Magnesium, Zinc Alloys, Mild Steel, Stainless Steel, Copper, Silicon Bronze, Titanium
- MMA: Mild Steel, Stainless Steel, Cast Iron
Includes:
- 8m T2 TIG Torch
- 4m Twist Lock Electrode Holder
- 4m 300 Amp Earth Clamp & Lead
- Argon Flowmeter Regulator
- 1.8m Gas Hose with fittings
- Operating Manual
Features:
- Effortlessly weld any metal with the high-frequency AC/DC TIG
- The ultimate combination of AC and DC available with Mixed Arc settings
- Switch your AC welds to suit your needs with the choice of three waveforms
- VRD: Yes
- Foot Control Connection: Yes
- HD Backlit Interface: This next generation interface panel is bright and easy to read in any environment
- Power Factor Correction (PFC): PFC gives you maximum electrical efficiency. It automatically compensates for any voltage fluctuation, and PFC is also designed to be generator friendly.
- 10A Plug: A 10 AMP power plug can be used on any domestic outlet. It’s perfect for the DIY home handyman or the professional welder looking for a machine that can be used almost anywhere
- AC/DC: Weld every kind of metal. With the ability to run on an Alternating Current, you’re able to weld aluminium as effortlessly as mild and stainless steels.
- High-Frequency TIG: Maximise your results from start to finish. A high-frequency torch can start an arc without contacting the workpiece, reducing the risk of contaminating the tungsten or the weld. It also means you get access to the entire TIG weld cycle, including pre- and post-gas and up and down slope parameters.
- Multiple AC Waveforms: Completely customise your aluminium welds. Switch between Sine, Square, and Triangle waves to change the arc characteristics, bead profile, and penetration to suit your weld
- Mixed AC/DC: Experience the best of both worlds. Mixed AC/DC combines the efficiency of AC and the penetration of DC- TIG in one weld. With it, you get faster welding speeds, better penetration, a faster weld puddle on cold workpieces, and you can weld thicker materials
- Pulse TIG: Minimise the heat input without compromising on any of the penetration. Alternating between a peak and base current reduces the amount of heat input and focuses the arc, perfect for sheet metals and out-of-position welding
- Foot Control Ready: The perfect accessory, easily adjust your amperage to suit every weld as you go without disrupting your torch movement
- Smart Fan: Smart Fan diminishes noise, saves power, helps reduce energy costs, and minimises the number of contaminants being pulled through the machine
- Advanced MMA Features: The RAZOR TIG 200 AC/DC features adjustable Arc Force and Hot Start functionality. These features are designed for improving weld quality and ease of use.
Specifications:
- Primary Input Voltage: 240V Single Phase
- Supply Plug: 10 Amp
- Leff (A): 9.8
- Rated Output: 5-200A
- No Load Voltage: 65V
- Protection Class: IP23S
- Insulation Class: H
- Minimum Generator: 9.0kVa
- Dinse Connector: 35/50
- Standard: AS/NZ60974-1
- TIG:
- TIG Function Type: AC/DC HF TIG & AC/DC Pulse
- TIG Welding Current Range: 5-200A
- TIG Duty Cycle @40°C: 20% @ 200A, 60% @ 115A, 100% @ 90A
- TIG Welding Thickness Range: 1-8mm
- STICK:
- STICK Welding Current Range: 20-160A
- STICK Duty Cycle @40°C:
- 15% @ 160A
- 60% @ 80A
- 100% @ 62A
- STICK Electrode Range: 2.5-4.0mm
- STICK Welding Thickness Range: 2-10mm
- Dimensions: 500mm x 170mm x 340mm
- Weight: 11.7kg
UNIMIG Professional Series Helmet - Black U21015
Includes
- Professional Series Welding Helmet
- Operating Manual
- Carry Bag
- Spare Inner/Outer Lens Cover
- UNIMIG Sticker Pack
Professional Series Helmet - Black
Keep your eyes and face protected during every weld with our Professional Series helmets. Featuring our brand new auto shade detection technology and 5 arc sensors, these helmets take the guesswork out of your shade selection, and the 1/1/1/1 optical classification combined with our largest viewing size lens yet, you'll be able to see everything you do with crystal-clear clarity. Choose from a sleek, clean professional black or pick from one of the eye-catching graphics.
- ELITEVISION™ Lens Technology
ELITEVISION™ Lens Technology greatly improves the optics of your helmet, letting you see a full spectrum of colours. It also helps to reduce eye fatigue making it safer for extended periods of welding. - 1/1/1/1 Classification
Superior optical clarity with a 1/1/1/1 classification. Get an Auto-Darkening Filter (ADF) that’s scored top marks across the board for a crystal-clear view of your weld at every angle. - Auto Shade Select
Take the guesswork out of your protection. The auto shade select technology instantly detects the arc and decides what shade you need to keep your eyes safe for every kind of welding. - 102.5x102.5mm View Size
Unmatched visibility in every situation. The 102.5x102.5mm viewing area lets you see every weld with complete clarity. - 3.0 Light State
Get a clear view before and after the weld, as well as during. With a 3.0 light state, you’ll be able to see your workpiece as well with the helmet on as with it off. - External Grind Button
Seamlessly switch to grind mode with the click of a button. When the helmet is in grind mode a small LED will illuminate, so you don’t need to take the helmet off to check. - 5 Arc Sensors
Detect every arc instantly. The four optimally positioned arc sensors, coupled with an arc intensity sensor, trigger the Auto-Darkening Filter. Experience unparalleled eye protection right from the start of every weld, even when you’re out of position. - Backup Battery
2 x CR2450 backup batteries improve the performance and reliability of the auto-darkening filter. - 4 Point Harness
Get the perfect fit and stay comfortable for hours. Adjust all 4 points of contact to suit you, and have the weight spread more evenly, minimising neck strain.
Specifications
- Filter Dimensions: 114x133x9.5mm
- View Size: 102.5x102.5mm
- Arc Sensors: 4 Arc Sensors, 1 Arc Intensity Sensor
- Classification: 1/1/1/1
- Light State: 3
- Dark State: 5-13
- UV/IR Protection: DIN15
- Time from Light to Dark: 0.04ms
- Time from Dark to Light: 0.1-0.9s
- Sensitivity Delay: Adjustable (1-5 for low-high)
- Power Supply: Solar Cells & 2 x CR2450 Replaceable Battery
- Operating Temperature: -10?C to 65?C
- Storage Temperature: -20?C to 85?C
- Shade Control: Yes
- Grind Mode: Yes (External)
- Minimum TIG Amperage: 2A
- Standards: AS/NZS 1337.1 B (High Impact) / AS/NZS 1338.1 (Auto-Darkening)
UNIMIG ROGUE TIG Welding Gloves UM-S-TG1L
ROGUE™ TIG Welding Gloves are made from premium goat hide leather. The high-strength Kevlar stitching is durable against heat, and cotton-lined palms are used to increase control and decrease fatigue in your hands. The reinforced leather side patch assists in durability and reduces fatigue. The glove has also been designed to give you superior fingertip sensitivity for accurate welds.
- Increased feel
- Decreased fatigue
- Premium goat hide leather
- High-strength Kevlar stitching
UNIMIG Wired Foot Pedal - 7/9 Pin Suits U12003K / U12002K / KUM-M-VT180ACDC / U12001K / KUM-M-RTIG200ACDC U51017
The UNIMIG TIG Welding Foot Control is a convenient hands-free alternative for use on High-Frequency TIG machines. This includes amperage control, allowing the welding current to be adjusted remotely from the welding machine during welding. The simple design makes installation and operation of the foot control effortless, and the sturdy metal construction guarantees durability.
UNIMIG T2/T3W Torch Consumable Starter Kit U42005
We’ve revamped our TIG consumable starter kits! Now more versatile than ever, we’ve included a wider range of sizes for ceramic and quartz cups. Our starter kit now comes with everything you need to get welding across a wide range of applications.
Includes
- 1 x UMCT2C07 – Ceramic Cup Size 7
- 1 x UMCT2C08 – Ceramic Cup Size 8
- 1 x UMCT2C10 – Ceramic Cup Size 10
- 1 x UMCT2GL16 – Gas Lens Collet Body 1.6mm
- 1 x UMCT2GL24 – Gas Lens Collet Body 2.4mm
- 1 x UMCT2HG – Head Gasket
- 1 x UMCT2SN – Heat Zone Isolator
- 1 x UMCT2QZ06 – Quartz Cup Size 6
- 1 x UMCT2QZ08 – Quartz Cup Size 8
- 1 x UMCT2QZ10 – Quartz Cup Size 10
- 1 x UMCT2QZSN – Quartz Zone Isolator
- 2 x TR000516 – Rare Earth Tungsten Electrode 1.6mm
- 2 x TR000524 – Rare Earth Tungsten Electrode 2.4mm
- 1 x UMCT2SBC – Short Back Cap
